Moving & Placing
Base Unit
The Model G0513/G0514 is
a heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to move
the shipping crate and
remove the machine from
the crate.
To move and place the bandsaw:
1.
2.
,
Figure 13.
3.
Figure 13
Mounting to Shop
Floor
Bolting to Concrete Floors
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure 14
Figure 14