Roll Paper Holder - Epson LX-300+ User Manual

Roll paper holder

The optional roll paper holder (#8310) allows you to use your
printer with 8.5-inch roll paper like that used with telex machines.
To use the roll paper holder, follow the steps below. This option
is not available in all countries.
1. Turn off the printer and remove the paper guide.
2. Position the roll paper holder beneath the printer as shown
below. Fit the two holes in the base onto the two positioning
pegs on the bottom of the printer.
3. Push the paper-release lever to the single-sheet position.
Caution:
c
Be careful to avoid dropping the roll paper holder when lifting
the printer. Only the printer's weight holds it in place.
Using the Printer
2
2-37