Envelopes - Epson LX-300+ User Manual

Envelopes

You can feed envelopes individually using the paper guide.
Before loading an envelope, set the paper thickness lever to 2,
3, or 5. See "Adjusting the paper-thickness lever" on page
2-21.
To load an envelope, follow the steps in "Running the Self
Test" on page 1-11. Insert the wide edge of the envelope into
the printer first, printable-side down. When you insert the
envelope between the paper guides, push it firmly and hold
it until it feeds into the printer.
Use envelopes only under normal temperature and humidity
conditions.
Make sure the printing stays entirely within the printable
area.
The print head must not go past the left or right edge of the
envelope or other thick paper. (See "Printer Specifications" on
page A-4 for specifications.) It's a good idea to print a test
sample using a normal single sheet of paper before you print
on the envelopes.
2-24
Using the Printer