Installing The Paper Guide; The Indicator Lights - Epson LQ-2500 User Manual

After entering SelecType, the four buttons on the control panel
function according to their SelecType assignments:
OPTION.
SETTING, and

The indicator lights

In addition to the
POWER--This light indicates that the printer is turned on and
receiving power.
READY--This light comes on when the printer is on line and ready to
print. It normally flickers during printing.
PAPER OUT--This
[PAPER
message

6 Installing the Paper Guide

You can install the paper guide in two different positions. Right now
you need to install it to support a single sheet. Before you begin,
remove the dust cover so that you can see what you are doing.
The edge tab
First, put the edge tab into the guide. Squeeze it together as shown in
Figure 1-8 and insert the tab into the groove. Then move the edge tab
so that it is about 1/4-inch to the left of the widest ridged marking on
Figure 1-8.
Installing the edge tab
Setting Up the Printer
See Chapter 2 for a full explanation of SelecType.
ON LINE
light, the LQ-2500 has three other lights.
light indicates that the printer is out of paper. The
OUT] is also displayed.
EXIT, MENU,
1-9