Control Panel Label For Horizontal Use; Installing The Paper Discharge Guide - Epson TM-L90-i Technical Reference Manual

Control panel label for horizontal use

When using the printer in the horizontal position, affix the control panel label for horizontal use
as shown in the figure.

Installing the paper discharge guide

If the auto cutter is used to make full cuts with the printer installed horizontally, the paper
discharge guide must be installed as shown in the figure.
This will prevent the cut paper from falling into the paper path, which could cause double cuts
and paper jams.
If roll paper with an inner diameter smaller than 25.4mm and an outer diameter smaller than
31.4mm is used, paper jams are likely to occur. Therefore, do not install the paper
discharge guide.
56