Removing The Paper Guide; Installing The Paper Guide - Epson TM-L90II LFC User Manual

Removing or Installing the Paper Guide
Install or remove the paper guide to match the width of the roll paper in use.
❏ For the 65* model
A 40 mm paper guide is installed.
• When using a roll paper that is 40 mm wide, use the printer as it is.
• When using a roll paper that is 80 mm wide, remove the installed guide.
❏ For the 66*/67*/68* model
A 58 mm paper guide is installed.
• When using a roll paper that is 58 mm wide, use the printer as it is.
• When using a roll paper that is 80 mm wide, remove the installed guide.
• When using a roll paper that is 40 mm wide, remove the installed guide, and
install the included 40 mm paper guide.
CAUTION:
Changing to a roll paper that is wider than the roll paper in use can cause
decreased print quality.

Removing the Paper Guide

1. Open the roll paper cover using the cover open lever. (See illustration
2. Pull the paper guide in the direction of the arrow in illustration
pulling the lever of the paper guide to remove it.

Installing the Paper Guide

CAUTION:
Installation position of the paper guide varies depending on the width of the
paper guide. Do not install the 58 mm paper guide in the position for the 40
mm paper guide.
1. Open the roll paper cover using the cover open lever. (See illustration
2. Align the projection of the paper guide with the hole (Illustration
the roll paper holder.
3. Align the corner of the paper guide with the notch (Illustration
roll paper holder.
4. Align 2 holes (Illustration
roll paper holder.
5. Push the lever of the paper guide down until the paper guide clicks into
place. (See illustration
) in the paper guide with 2 projections of the
E 5
D.)
C
E 4)
TM-L90 User's Manual 9
B.)
while
B.)
) in
E 3
in the