Ultra Start 3250M Installation Manual page 8

Advanced 2-way remote vehicle starter
Hide thumbs Also See for 3250M:
Table of Contents

Advertisement

PROGRAM MODE 1 - USER SETTINGS
Setting 1- Ignition Auto Lock
1 Ignition Lock & Unlock Enabled
2 Ignition Lock Only
*3 Ignition Auto Lock Disabled
Press the Program Button 1 time to select setting 1 (This will be confirmed by 1 LED flash)
Press and hold the Program Button until you receive the appropriate # of park light flashes and/or horn honks.
Release the Program Button. Press Program Button momentarily to move to next program step or repeat to change selection.
Setting 2- Horn Honk Settings
1 Lock & Unlock chirps Disabled
2 Lock & Unlock chirps Enabled
*3 All Chirps Enabled
Press the Program Button 2 times to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Button until you receive the appropriate # of park light flashes and/or horn honks
Release the Program Button. Press Program Button momentarily to move to next program step or repeat to change selection.
Setting 3- Door Lock Options
1 Double Pulse Unlock
2 3 Second Lock & Unlock
*3 0.75 Second Pulses
See setting 4 for door unlock and disarm output durations.
Press the Program Button 3 times to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Program Button until you receive the appropriate # of park light flashes and/or horn honks.
Release the Program Button. Press Program Button momentarily to move to next program step or repeat to change selection.
Setting 4 - Door Unlock & Disarm Pulse Duration
1 Short Pulses
2* Normal
Press the Program Button 4 times to select setting 4 (This will be confirmed by 4 LED flashes)
Press and hold the Program Button until you receive the appropriate # of park light flashes and horn honks.
Release the Program Button . Press momentarily to move to next program step or repeat to change selection.
Note: Programming this option will change the pulse length of this output from 750ms to 125ms.
PROGRAM MODE 2 - ADDITIONAL SETTINGS
Setting 1 - Secure Valet Mode
1 Secure Valet Active
2* Normal Valet Active
Press the Program Button 1 time to select setting 1 (This will be confirmed by 1 LED flash)
Press and hold the Program Button until you receive the appropriate # of park light flashes and horn honks.
Release the Program Button . Press momentarily to move to next program step or repeat to change selection.
Setting 2 - Parking Light Output
1 30 Second Parking Lights on Disarm 1 Flash
2 Negative Park Light
3* Normal Parking Lights
Press the Program Button 2 times to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Button until you receive the appropriate # of park light flashes and horn honks.
Release the Program Button . Press momentarily to move to next program step or repeat to change selection.
Setting 3 Horn Honk Timing
1 5ms Pulsed Output
2 20ms Pulsed Output
*3 10ms Pulsed Output
Press the Program Button 3 times to select setting 3 (This will be confirmed by 3 LED flashes)
8
Press and hold the Program Button until you receive the appropriate # of park light flashes and horn honks.
Release the Program Button . Press momentarily to move to next program step or repeat to change selection.
1 Flash
2 Flashes
3 Flashes
1 Flash
2 Flashes
3 Flashes
1 Flash
Single .75sec.Lock pulse and double Unlock Pulse
2 Flashes
3 second pulses for Lock & Unlock
3 Flashes
0.75 second pulses for Lock and Unlock
1 Flash
125ms pulses with Unlock and on the disarm output.
2 Flashes
750ms pulses with Lock, Unlock and on disarm output.
1 Flash
Valet only if ignition "ON" and Program Button is held for 15 seconds
2 Flashes
Valet if ignition "ON" and Program Button is held for 5 seconds
2 Flashes
3 Flashes
1 Flash
2 Flashes
3 Flashes
Doors Lock / Unlock when the key is turned On/ Off
Doors Lock when ignition key is turned ON only
Doors do not Lock or Unlock with the Ignition key
Honks for Panic and Car Finder Mode only.
Honks for Lock, Unlock, Panic and Car Finder Mode Only.
Honks for Lock, Unlock, Start, Panic and Car Finder.
Park Lights on for 30 seconds on disarm
Switches the Park Light and the Trunk Release (3rd Ch)
2 Park Light Flashes on disarm
Short (Quiet) Pulses
Long (Loud) Pulses
Normal (Medium) Pulses

Advertisement

Table of Contents
loading

This manual is also suitable for:

3250

Table of Contents