Reloading During Printing - Epson LQ-1050 User Manual

WARNING: Never advance the paper using the platen
knob except in the case of a paper jam or other paper feed
problem. Using the platen knob while the printer is on
may damage the printer and affect the loading and short
tear-off positions.
Note: If the platen turns without loading the paper, press the
ON LINE button to take the printer off line and completely remove
the paper. Then re-insert the paper more firmly.
If you need to adjust the position of the paper after it is loaded, use
the micro-adjustment feature described in Adjusting the Loading
Position in Chapter 3.
To eject the paper, press the ON LINE button to take the printer off
line; then press the LOAD/EJECT button.
You are now ready to begin printing.

Reloading During Printing

When you print a document of more than one page using single-
sheet paper, the printer stops printing when it reaches the bottom of
the page. When this happens, the ON LINE light either goes off
automatically or remains on, depending on your application
program software. If the ON LINE light remains on, the first thing you
do is press the ON LINE button to take the printer off line.
Once the ON LINE light is off, remove the sheet that has just been
printed (if necessary, press the FORM FEED button to eject the page).
Then load a new sheet to start printing the next page and follow any
additional prompts from your software.
Paper Handling 2-5