Default settings
The table below shows the default conditions that become valid
when the printer is initialized.
Item
Print head position
On/off line status
Left and right margins
Line spacing
Page length
Top of form position
Tear-off position
Front/rear tractor selection
Vertical tab position
Horizontal tab position
Character pitch
Justification
Special printing effects
Input buffer
User-defined character set
I
Technical Specifications
B-14
Default condition
Left side of carriage
On line
Cancelled
1/6-inch line spacing
Conforms to current DIP switch setting
Last setting by TOP OF FORM button
Last setting by TEAR OFF button
Last setting by PAPER SELECT button
Cleared
Every eight characters
Reset to current DIP switch setting
Left justification
Conforms to current DIP switch settings where
applicable. Other effects are cancelled.
Hardware: Cleared
Software: Not cleared
Hardware: Cleared