Epson DFX-5000 User Manual page 165

ESC b
Format:
A S C I I c o d e : E S C b c n 1 n 2 . . . 0
Decimal:
Hexadecimal:
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be between 0 to 7.
Therefore, up to eight sets of vertical tabs can be set. The
channels are selected by ESC /. To clear the tabs in channel c
use ESC b c 0.
ESC /
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command is used to select the vertical tab channel, with
the value of c from 0 to 7. All subsequent vertical tab commands
use the channel selected by this command. If no channel has
been selected, channel 0 is used.
Command Summary
8-18
27 98
c
1B 62
ESC / c
27 47 c
1B 2F c
Set Vertical Tabs in Channels
n1 n2
c
n1 n2
Select Vertical Tab Channel
... 0
... 00