Epson DFX-5000 User Manual page 129

The automatic tear-off feature does not work when the pull tractor
is installed. To tear off documents, press the
advance the paper to a point where it can be torn off.
The following steps show you how to load paper using the
optional pull tractor with the printer's built-in rear tractor. If you
have not yet installed the pull tractor, load paper onto the rear
tractor before installing the pull tractor. Then install the pull
tractor as described earlier in this chapter.
1.
Turn on the printer and open the top cover.
If there is no paper loaded on the rear tractor, you need to
2.
follow Steps 2a through 2c below to load paper onto the rear
tractor. If there is paper on the rear tractor, in either the top of
form or standby position, skip to Step 3.
Pull the levers on the pull tractor toward you to release the
2a.
pull tractor, and then tilt the tractor forward so that its pins
rest on the metal frame of the printer.
2b. Load paper onto the rear tractor as described on page 2-9.
Using the Printer
6 - 1 0
Options
FORM FEED
button to