Using The Pull Tractor With Rear Tractor - Epson DFX-5000 User Manual

9. Close the sprocket covers. Slide the sprocket units so that the
paper is straight and smooth, and then lock them into place.
10. Adjust the top of form position as described in in Chapter 2.
FORM FEED
11. Press the
the printer. Make sure the edge of the first sheet emerges
below the paper separator.
12. Close the top cover and press the
ready to print.
Using the pull tractor with the rear tractor
If you are using labels or multi-part forms with more than four
parts including the original, do not use the rear tractor; use the
front tractor instead. See the previous section on using
tractor with the front tractor.
You can switch between the front and rear tractors at any time
when you are using the pull tractor. Just press the
button and then use
additional distance to the pull tractor. (Labels require special
handling. See the section on using labels in Chapter 2.)
button to feed the paper out the back of
the FORM FEED
Using the Printer Options
ON LINE
button so you are
FRONT/REAR
button to feed the paper the
the
pull
6-9