ESC p
Format:
ASCII
code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
The width of proportional characters varies from character to
character. Therefore, a narrow letter like i receives less space
than a wide letter like W. The proportional widths are given in
the character tables, which appear in Appendix A. This
command overrides condensed. This command is available for
draft, NLQ, and user-defined characters.
SI
Format:
ASCII code: SI
Decimal:
Hexadecimal: 0F
Comments:
Prints characters at about 60 percent of their normal width. For
example, the condensed 10 cpi mode has 17 characters per inch.
Proportional mode cannot be condensed, and proportional
overrides condensed. This command is not available in NLQ.
8-26
Command Summary
ESC
p
27
112
1B
70
(The decimal or hexadecimal values 0
and 1 or the ASCII characters "0" and
"1" can be used.)
15
Turn Proportional Mode On/Off
n
n
n
Select Condensed Mode