26
| Unpacking and Setup Guide
T
ESTING THE
Once your printer is set up, you should test it to make sure it works correctly. This
involves three steps:
Plugging in the printer
Loading paper
Printing a status sheet
Plugging in the Printer
Follow these steps to plug in the printer:
1 Make sure the printer is turned
off. The power switch, which
is located on the left side of
the printer, should be in the
position shown:
2 Connect the power cord to the
AC inlet below the power
switch.
3 Plug the other end of the
power cord into a properly
grounded outlet. Avoid using
outlets where other appliances
are plugged in.
P
RINTER
AC inlet