6
| Unpacking and Setup Guide
R
EMOVING THE
To protect your printer during shipping, tape has been placed on the outside and
various types of packing materials have been placed inside the printer. Remove the
tape from the outside of the printer and follow the instructions in this section to
remove the protective materials from these locations:
Fuser unit
Paper cassette
Paper path unit
Toner cartridge slots
Unpacking the Fuser Unit
Follow these steps:
1 Pull out the fuser unit using the
handle, as shown:
2 Remove the two metal pieces by
pushing them back toward the printer
and pulling them out.
P
M
ACKING
ATERIALS