Installing The Face - Up Tray - Epson DFX 8000 Unpacking And Setup Manual

12 | Unpacking and Setup Guide
2 Snap the pin on the left side into the
corresponding hole.
I
NSTALLING THE
The face-up output tray allows you to print on envelopes, transparencies, labels, and
other materials that don't work with the face-down tray. Follow these steps to install
the face-up tray in the output slot on the left side of the printer.
1 Fold down the metal spring against the tray.
2 Insert the pin on the
right side of the tray
into the hole in the
output slot. Then
release the spring so it
rests against the printer.
Make sure the metal
spring is not jammed
inside the output slot.
F - T
ACE UP RAY
spring