Sony Handycam DCR-HC62 Operating Manual page 47

"_° Tips
• You can sa_e pictures edited using special
ct]ccts on a "Memory Stick Duo" (p. 60) or
record dram on another VCR/DVD device, etc,
(p. 56).
Your camcorder will shoot l flame of tile
picture at a selected interval and keep them
in memory until it has stored several
frames. This function is useful to observe
the movement of clouds or tile changes of
daylight. These pictures appear smooth
when played back. Connect your camcorder
to the wall outlet (wall socket) using the
supplied AC Adaptor for this operation.
[a]
[a]
[a]
I I I
[a]: Recording
[b]: Interval
(!) Touch [g_] --+ [_7/[_7 to select a
desired interval time ( 1 to 120 seconds) ---+
[iN.
@ Touch [REC START].
Recording starts and • changes to red.
To interrupt, touch [REC STOP].
To resume, touch [REC START].
To cancel, tottch [RE(? STOP], then [END].
O Notes
• During Smoodl intel_'al recording, your
camcorder may pertbrm tile END SEARCH
ftmction to locate tile end in currcnl recordings
on lhe tape alter scveral flames have been
recorded.
• Do not lurn oil tile power or disconnecl lhe
power source willie a message is displayed on
the scrcen.
• Tile camcorder will shoot severM frames tot the
first and lasl shots of lhe Smooth imerval
recording.
• Snlooth imerval rccording is released when
approximately 12 llours have elapsed after
sllooling has begun.
• Sounds arc nol recorded.
• Tile last low tiames may not be recorded if tile
bauery or tape has i1111 o ut.
• There may be discrepancies in lhe imeJwal.
"_" Tips
• If you adjust tile tbcus manually, you can recoM
clear pictures even if llle light changes
/[FOCUSI, 15.39).
• You can silence tile recording be_p by setling of
[BEEP] (i5. 52).
You carl record still images on tile
"Memory Stick Duo" at a selected intervah
This fimction is useful to observe the
movement of clouds or the changes in
daylight, etc.
[a] [a] [a] _'
[a]: Recording
[b]: Interval
(!) Touch [SgY]--+ a desired interval time (I, 5
or 10 minutes) ---+ [_ --+ [ON] (_m /
[XN + IX].
@ Press PHOTO fidly.
_i_ stops flashing and the interval still
image recording starts.
To cancel [INT.REC-STL], select
[OFF1.
The default setting is [ON], allowing you to
view tile demonstration about 10 minutes
after you have removed both a cassette and
a "Memory Stick Duo" from your
camcorder, and slide the POWER switch
repeatedly to tttrn on the CAMERA-TAPE
lamp.
Continued._
47