Sony Handycam DCR-HC62 Operating Manual page 85

Videohead
It is recommended you use a cleaning
cassette (optional) before recording
anything important.
• If tile vide() heads arc dirly, video or sound
distortion nlay be apparcnl.
• If the h)lh)wing problenl occurs, clean file vide()
heads lbr 10 seconds with lhe Sony DVM-
12CLD cleaning casseue/opfional/.
Mosaic-paoern noise appears on tile playback
picture or file screcn is displayed in blue.
Playback pictures do not move.
Playback pictures do nol appear or tile sound
breaks off.
[_{i_ Dirty video bead. U_ a cleaning
cas_tte.] appears on file scrcen during
recording/playback.
• Tile video beads will wear aller long u_. If you
cannot oblain a clear image even after using a
cleaning casseoe (optional), it might be because
tile vide() beads are worn. Please comacl your
Sony dealer or local aulhorized Sony smxice
lilcilily lo have the video heads replaced.
LCDscreen
• Do not exert excessive pressure on tile LCD
scwen, as il may cause damage,
• If your camcorder is used in a cold place, a
residual inlage may appeal on the LCD screen.
This is not a malflmction.
• While using your canlcorder, file back of the
LCD scrccn may heat up. This is not a
mallunction.
N To clean the LCDscreen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional). do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
N Onadjustment ofthetouch panel
(CALIBRATION)
The buttons oi7 the touch panel may not
work correctly. If this happens, follow the
procedure below.
It is
recommended you conllect your
camcorder to the wall outlet (wall socket)
using the supplied AC Adaptor during the
operation.
(!) Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp.
@ Touch Ig_gff01 --+ [MENU] ---+
(STANDARD SET) ---+ [CALIBRATION]
---+[UK].
The screen changes to 16:9 ratio when
using 4:3 ratio.
X
CALIBRATION
1/3
)uch the "x"
(_) Touch the "x" displayed ol7the screen with
the corner of the "Memory Stick Duo" or
the like.
The position of the "x" changes.
To cancel [CALIBRATION], touch
ICANCELI.
If you clid not press the right spot, start from
step @ again.
O Notes
• Yon cannol calibrate tile LCD screen il it is
rolated.
_=..
g
i
Onhandling thecasing
• If tile casing is soiled, cleml the camcorder body
with a soft cloth lightly moislened wifll waler,
and then wipe the casing with a dry soft clofll.
• Avoid tim lollowing to avoid damage to tile
finish.
Using chmnicals such as thinner, benzine,
alcollol, cllemical clolhs, repellent, insecticide
and sunscreen.
Handling wifll above subslanccs on your
bands.
Leaving tile casing in contacl with rubber or
vinyl ot!iects h)r a hmg period of tinlc,
Continued._ 85