Table of Contents
Advertisement
VlZlOVU37L HDTV10A UserManual
WIZIO
Remote
Control
GUIDE - This button displays program information.
Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic
Programming
Guide will
appear in the screen.
POWER - Press this button to turn the TV on from the Standby mode.
Press it again to return to the
Standby mode.
TV - Press this button to select TV.
AV - Press this button to select the Audio Video input. Pressing this button repeatedly will get you to the
AV input. Keep in mind that if S-Video cable is being used, then AV will show the signal going through this
input as the S-video takes priority.
COMPONENT
- Press this button to select the Component
(YPbPr) input.
Pressing
this
button
repeatedly
will take
you through
the
Component
(Component 1 and component 2) inputs.
HDMI - Press this button to select the HDMI input. Pressing this button
repeatedly
will get you through the HDMI (HDMI1, HDMI 2 and HDMI 3)
different inputs
MENU - Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
_D
A_
_ These buttons navigate the On-Screen Display (OSD).
MUTE - This button turns the sound on and off.
LAST - This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -) - These buttons turn the volume up or down.
CH (+ or -) - These buttons change the channels
up or down.
Number
Button Pad - Use these buttons to select
a channel or enter a password.
INPUT -
This button allows
the user to cycle
through
the inputs.
Repeatedly
pressing
of this
button will step you through the input sources in the
following
sequence:
TV,
AVl/S-VIDEO,
AV2,
Component
1, Component 2, RGB, HDMI 1, HDMI
2 and HDMI 3. Once you have stepped through the
entire sequence, you will return to the beginning.
(DASH)
-
When
selecting
a digital
channel
directly use this button for the separation of main
and sub-channels.
For example,
channel
28-2
would be selected by the button sequence 2 8 - 2.
Version 3/12/2008
12
www.VlZlO.com
Advertisement
Table of Contents
