Table of Contents
Advertisement
VlZIO VU37L HDTVl0A
User Manual
Ohapber
S Maiobeoaooe
and
TroobLeshoobimq
Sol Malntenanoe
I.
2.
Make sure that the power cable is removed from the socket before cleaning the TV.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV.
Such
chemicals may damage the housing, screen glass and remote control, and cause paint to
peel.
CLeaninq
the
Hoosinq
and
Remote
Control
I.
2.
Use the VlZlO soft cloth (included) for cleaning.
If the housing or remote control is seriously contaminated,
use a soft cloth moistened with
diluted neutral cleaner to clean the display.
Wring water out of the cloth before cleaning to
prevent water from penetrating
into the housing.
Wipe the display with a dry cloth after
cleaning.
Cteaninq
the
Screen
.
2.
Use the VlZlO soft cotton cloth (included) to gently clean the screen.
The screen glass is very fragile. Do not scrape it with any sharp object.
Do not press or tap
the screen to avoid cracking.
When the screen is seriously contaminated,
use a soft cloth
moistened
with diluted neutral cleaner to clean the display.
Wring water out of the cloth
before cleaning to prevent water from penetrating into the housing.
Wipe the display with a
dry cloth after cleaning.
TroubLeshootinq
Guide
If the TV fails or the performance
changes
dramatically,
check the display in accordance
with the
following instructions.
Remember to check the peripherals to pinpoint the source of the failure.
If the
display still fails to perform as expected, contact the VlZlO for assistance by calling 1-877-MYVlZlO
(698-
4946) or e-mail us at techsupport@vizio.com.
No power.
No sound.
If the screen is black.
Make sure the power button is ON (White VlZIO Logo).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical
device (like a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
Check your audio connection
Press MUTE on the remote control again, so that MUTE disappears from the screen
Check your audio settings, your TV audio may be set to SAP, min or speakers off
Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected
Check your input connections.
Version 3/12/2008
67
www.VlZlO.com
Advertisement
Table of Contents
