Vizio VU37LHDTV10A User Manual

Hide thumbs Also See for VU37LHDTV10A:
Table of Contents

Advertisement

Quick Links

VlZlO VU37L HDTV10A User Manual
Dear VlZlO Customer,
Congratulations
on
your
new
VlZlO
VU37L
HDTVl0A
High
Definition
LCD
Television
purchase.
Thank
you for your support.
For
maximum
benefit of your set, please read these
instructions
before making any adjustments,
and
retain them for future reference.
We hope you will
experience
many years of enjoyment
from your
new
VlZlO
VU37L
HDTVl0A
High
Definition
Television.
For assistance,
please call (877)-698-4946
or e-
mail us at techsupport@vizio.com.
To purchase
or inquire about accessories
and
installation
services for your VlZlO
LCD HDTV,
please visit our website at www.vizio.com
or call
toll free at (888)-849-4623.
We recommend
you register your VlZlO VU37L
HDTVl0A
either at our website www.VlZlO.com
or fill in your registration card and mail it in.
For
peace of mind and to protect
your investment
beyond the standard warranty, VlZlO
offers on-
site extended
warranty
service
plans.
These
plans
give
additional
coverage
during
the
standard warranty period. Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VU37L HDTVl0A.
Purchase Date
VlZlO is a registered trademark of VlZlO, Inc. dba V, Inc.
HDMI logo and "High Definition Multimedia Interface" are
registered trademarks of HDMI Licensing LLC.
Manufactured
under license from Dolby Laboratories.
Delby and the double-D symbol are trademarks of Dolby Laboratories.
Version 3/12/2008
1
www.VlZlO.com

Advertisement

Table of Contents
loading

Summary of Contents for Vizio VU37LHDTV10A

  • Page 1 To purchase or inquire about accessories installation services for your VlZlO LCD HDTV, please visit our website at www.vizio.com or call toll free at (888)-849-4623. We recommend you register your VlZlO VU37L HDTVl0A either at our website www.VlZlO.com or fill in your registration card and mail it in.
  • Page 2 VlZlOVU37L HDTV10A UserManual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product.
  • Page 3 Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation, Version 3/12/2008 www.VIZIO.com...
  • Page 4 HDTV with the glass facing downwards on a surface without protective padding. IMPORTANT: Save the carton and packing material for future shipping. PaGkaqe Gomtemts VIZIO vUa7L HDTV10A VlZIO Remote Control VR2 VlZlO Screen Cleaning Cloth Power Cord This User Manual...
  • Page 5 VlZIOVU37L HDTVl0AUserManual ffor V 210 Rdditiona[ Certif ed RccessoFies HDTV oR sotd separate[V VU37L Wall Mounts High Definition Cables Extra or replacement Remote VlZlO also offers Installation Services and Extended Warranty Services for your VlZlO VU37L HDTVl0A To purchase or inquire about additional accessories and services for your VlZlO product, visit our web site at www.VlZlO.com or call us toll free at 888-VlZlOCE...
  • Page 6 VlZlOVU37L HDTV10A UserManual Preparinq Your HDTV ffor Wall Mouotioq remove stand base Unplug all of the cables and cords from your VU37L HDTV10A. Place the VU37L HDTVl0A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Push up the plastic panel on the back of the stand and lift it away once to release.
  • Page 7: Table Of Contents

    VlZIOVU37L HDTVl0AUserManual Tabke Contenbs Controts ..............Chapter i Basle Connections 1.1 Front Panel ................................1.2 Side Panel Controls ............................. 1.3 Rear Panel Connections ........................... 1.4 Right-Side Panel Connection ..........................1.5 VlZIO Remote Centrol ............................1.5.1 Insertion of Batteries in the Remote Control ....................1.5.2 Remote Control Range ..........................
  • Page 8 VlZlOVU37L HDTV10A UserManual 4.4.2 Auto Search ............................... 4.4.3 Partial Channel Search ..........................4.4.4 Skip Channel ............................. 4.4.5 MTS ................................4.4.6 Time Zone ..............................4.4.7 Daylight Saving ............................4.5 DTV / TV Input Setup ............................4.5.1 Language ..............................4.5.2 Sleep Timer ............................... 4.5.3 Wide ................................
  • Page 9: Front Panel

    VlZIO VU37L HDTVl0A User Manual Chapter Basic ControLs Connections Pronb Panel POWER 'VIZlO' LIGHT- The VlZlO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR - This is the window through which all of the remote control signals pass to the sensor, Point the remote control directly at this...
  • Page 10: Rear Panel Connections

    The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here,, Your VIZIO Certified HDMI HDMI-DVI cables...
  • Page 11: Right-Side Panel Connection

    VlZlO VU37L HDTV10A User Manual Riqht-Side Pane[ Connection HEADPHONE - Connect your headphone here for personalized listening without disturbing others. AV2 - Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external...
  • Page 12: Vlzio Remote Centrol

    VlZlOVU37L HDTV10A UserManual WIZIO Remote Control GUIDE - This button displays program information. Press this button once and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. POWER - Press this button to turn the TV on from the Standby mode.
  • Page 13: Insertion Of Batteries In The Remote Control

    Do not place any obstacles between the remote control and the receiver window. The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30°to the left and right, 20 ° up and down. _o$o3 VIZIO Universal Remote Control Precautions The remote control should be kept dry and away from heat sources.
  • Page 14: Which Video Connection Should I Use

    VlZIO VU37L HDTV10A User Manual Chapter Connectinq Equipment Which Uideo Connection ShouLd I Use? The VIZlO VU37L HDTV10A six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported,...
  • Page 15: Connecting Ceaxial (Rf)

    VlZIOVU37L HDTV10A UserManual Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, from Cable Box) DTV/TV CABLE/ANTENNA connector on the rear of the HDTV. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
  • Page 16: Connecting Your Hdtv Set-Top Box

    VlZIO VU37L HDTV10A User Manual a03 Connectinq Your HDTY Set-Top a°3°£ Us_nq HDN_ input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. {Best]: Connectinq your HDTV Set-Top Turn off the power to the HDTV and HDTV Set-Top Box.
  • Page 17 VlZlOVU37L HDTV10A UserManual Fore HDTV SetoTOp Boxes with Oq_: Turn off the power to the HDTV and HDTV Set-Top Box, Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the HDTV. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVl output on your HDTV Set-Top Box and connect the other...
  • Page 18: Using Component Video

    VlZIO VU37L HDTV10A User Manual 2,3°2 Usinq Component Video your Connectinq HOTV SetoTop {Better}: Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding (green color) connector in the Component1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
  • Page 19: Connecting Your Basic Set-Top Box

    VlZIOVU37L HDTVIOA UserManual Basic ConnectJnq Your SebTop 34.1 Usioq Composite Video Turn off the power to the HDTV and Set-Top Box. Using AV Cable, connect Video (yellow color) connector your Set-Top corresponding Video (yellow color) connector in the input (yellow color area) at the rear of the HDTV.
  • Page 20: Connecting Your Dvd Player

    VlZlOVU37L HDTV10A UserManual 2°5 Connecbinq Your Prayer You have several options for connecting your DVD player to your VU37L HDTV10A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2oS0£...
  • Page 21 VlZlOVU37L HDTV10A UserManual DVD Players with DVI: Turn off the HDTV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI2 end to the HDMI Input (white color area) at the rear of the HDTV. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVl output of the DVD player and connect the other end to the audio...
  • Page 22: Using Component Video

    VlZIOVU37L HDTV10A UserManual 2,,S°2 Usinq Component Video your Connectinq Ptaver (Setter]: Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component1 input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
  • Page 23: Using S-Video (Avl/S-Vldeo)

    VlZlOVU37L HDTVIOA UserManual 2°5°3 Usinq S,ogideo {RV1/S,oVIOEO} Connectinq your Player {Good}: Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear your player to the S-Video jack in the AVl/S-VlDEO input (yellow/red area) at the rear of the HDTV.
  • Page 24: Connecting Your Vcr Or Video Camera

    VlZIOVU37L HDTVl0AUserManual Connectlnq VouF Video Csmera Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV input (yellow/red area) at the rear of the HDTV. Connect an audio cable (white and red connectors) cable to the audio output connectors associated with the S-Video output on your VCR or Video Camera and connect the other end...
  • Page 25: Connecting An External Receiver/Amp

    VlZIOVU37L HDTV10A UserManual Eonnectinq external Receiver/Amp Turn off the power to the LCD HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors Receiver/Amp and connect the other end to the ANALOG (white area) audio connectors at the rear of...
  • Page 26: Optical Output Of Audio Received

    VlZlOVU37L HDTV10A UserManual 2..7..£ 0p 88l Ou pu Rudio eoeiued If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VU32L HDTV10A. Turn power HDTV Receiver/Amp.
  • Page 27: Connecting A Pc Computer

    VlZlOVU37L HDTV10A UserManual Commeotimq a PC Computer Turn off the power to the HDTV and PC Computer. Connect a 15@in D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV.
  • Page 28: Preset Pc Resolutions

    VlZlOVU37L HDTV10A UserManual 2,,8,,_ Pmeset Resokut_ons If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set this timing mode), Please see the table below for the factory preset resolutions, 640x480 31,5...
  • Page 29: Basic Lcd Hdtv Start Up

    VlZlOVU37L HDTV10A UserManual Chapter 3 Se inq Watch TeLevision For 'Preparing Your LCD HDTV for Wall Mounting', see page 6. 3°£ Start Basic HDTV Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket.
  • Page 30 VlZlOVU37L HDTV10A UserManual b. TheChannel Scanscreen will bedisplayed; default c hoice is Scan. Press the_ buttonontheremote control to commence t hesearch for available channels t obestored into memory. Ifyoudonotwant t o scanfor channels a tthistime,pressthe _t, button ontheremote tohighlight SkipScanandthenpressthe button.
  • Page 31 VlZIOVU37L HDTVl0AUserManual The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. No_e:DTVdg a boadcas s _o/:avaabe aeas Reler owww.antennaweb.orq olte _1o _ao'_ aboJ avaab /:y_ youraea ypeofa en_aa_d _ w_c_ dec ontopot/:yo_ a_e_a.
  • Page 32 VlZlO VU37L HDTV10A User Manual a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up.
  • Page 33 VlZlO VU37L HDTV10A User Manual d. Press the _ button to select it. e. Press either D or _ button to change setting to Normal, and then press the LAST key again to go back to previous screen. f. Press either _ or_button select the Picture Mode option.
  • Page 34: Watching A Tv Program

    VlZlOVU37L HDTV10A UserManual Watchinq Pr©qram Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. Press the power button on the remote or on the side of the HDTV.
  • Page 35: Adjusting Basic Hdtv Settings

    VlZIOVU37L HDTV10A UserManual 3°3 Rdoustioq Basio Settimqs Volume To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. MENU TV Channels CH ÷ To step up or down through the available TV channels, press the CH+ or CH- button on...
  • Page 36: Program Information

    VlZlOVU37L HDTVIOA UserManual Program Infommation Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed. Press the D or _ button to scroll up or down the channels. Each time you pause at a channel, the program list-will upaate with the program schedule for the channel and the window will show the live program for that channel.
  • Page 37: Rduanced Rd3Ustmemt O_ Hdtw

    VlZIOVU37L HDTV10A UserManual Chapter 4 Rdvanced Rd]ustment HDTW Usinq Someen DispLay {OSD} The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings.
  • Page 38: Dtv / Tv Input Picture Adjustment

    VlZIOVU37L HDTV10A UserManual Mode 4o2,,1 Picture When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the _ button to highlight the Picture Mode selection. Use the D or _ button to choose from Custom, Standard, Movie, Game, Vivid, Football, Golf, Basketball and Baseball, Picture Adjustments are available...
  • Page 39: Brightness

    VlZlO VU37L HDTV10A User Manual 4°3°3 Briqhbness Press the _ button to highlight the Brightness selection. Press the _ button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels.
  • Page 40: Tint

    Press the D or _ button to choose from the Off, Low, Medium or Strong setting. Once the adjustments are completed press the LAST button repeatedly exit completely. Version 3/12/2008 www.VIZIO.com...
  • Page 41: Color

    Color (Red, Green or Blue) Indicator Bar as before. Use the D or _ button to adjust the color. Press the MENU button when finished. Repeat the procedure to adjust the other colors if desired. Version 3/12/2008 www.VIZIO.com...
  • Page 42: Reset Picture Mode

    VlZlO VU37L HDTV10A User Manual 4o2,q Reset Plctume Mode Press the button to highlight the option for Reset Picture Mode selection Press _ button to return on Picture settings to factory default. Once the adjustments are completed press the LAST button repeatedly exit...
  • Page 43: Dtv / Tv Input Audio Adjustment

    VlZIOVU37L HDTV10A UserManual / TV input Rudio Rdgustment Rudio Node 4°3°i When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the _ button to highlight the Audio Mode selection.
  • Page 44: Balance

    VlZlOVU37L HDTVIOA UserManual 4.3.3 Ba[amoe Press the _ button to highlight the Balance selection. Press the _ button to start adjusting the balance and the menu page will disappear and be replaced by a small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the nominal position.
  • Page 45: Lip Sync

    VlZlOVU37L HDTV10A UserManual Presseither D or _ buttonto turn the audioout signalto Fixedor Variable. W henit is setto variable, v olume fromtheexternal s peakers willchange according tothevolume setting ontheTV. If it is fixed,thevolume canonlybechanged bythesettings ontheexternal s tereo system. PresstheLASTkeyonceto returnto theprevious screen or repeatedly t o returnto yourprogram if task hasbeencompleted.
  • Page 46: Dtv / Tv Tuner Setup

    VIZIOVU37L HDTVIOA UserManual 4°4 / TW Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.
  • Page 47: Partial Channel Search

    VlZlOVU37L HDTV10A UserManual 4,,4,3 Pac iaL Channel Seacoh If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Press the button to highlight the Partial Channel Search selection.
  • Page 48: Daylight Saving

    VlZlOVU37L HDTV10A UserManual 4o4_7 DsvU@ht 88u_nq As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control, Press the a button to highlight the Daylight Saving selection, Press the D or _ button to select On or Off.
  • Page 49: Sleep Timer

    VlZlOVU37L HDTVIOA UserManual 4,,5o2 Sleep Timer Press the a button to highlight the Sleep Timer selection. Press the _ button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes. Once the adjustments are completed press the LAST button...
  • Page 50: Input Naming

    VlZlOVU37L HDTV10A UserManual 4,,Bo4 Input Naminq This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press button to highlight this option.
  • Page 51: Cc (Closed Caption)

    VlZlOVU37L HDTV10A UserManual 4, So8 CE [Etosed Eaptlom} Press the a button to highlight the CO(Closed Caption) selection. Press the _ button. A separate menu will appear with the following CC settings Closed Caption on Mute When selecting Closed Caption as a feature to be used;...
  • Page 52: 14/V Position

    VlZlO VU37L HDTV10A User Manual recommendations of setting these parameters since you, the user would have your own taste or like of them. Press the key labeled LAST as many times as it takes to exit the menu screens. A,,So6 H/V Position Press the a button to highlight the H/V Position...
  • Page 53: Dtv / Tv Input Parental Control

    VlZIO VU37L HDTV10A User Manual 4,,5.7 / TV input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels then made available only after authorized password...
  • Page 54: Us Tv Rating

    VlZlOVU37L HDTV10A UserManual 4oS-Q Ratinq Follow the procedure in the previous section to display the Parental Control menu and then press the a button to highlight US TV Rating selection. Press the _ button and the Block TV Rating panel will be displayed. In the Block TV Rating panel you can customize the program blocking of the following TV ratings: Y - All children...
  • Page 55: Us Movie Rating (For Us)

    VlZlOVU37L HDTV10A UserManual Mov_e Ratinq {For 4,_5oio Press the a button to highlight the US Movie Rating selection. Press the q button and the Block Movie Rating panel will be displayed. In the Block Movie Rating panel you can customize the program blocking of the following Movie ratings: - General audience - Parental guidance suggested PG-13...
  • Page 56: Canadian French Rating

    VlZlOVU37L HDTV10A UserManual 4,,So12 Canadian Frenoh Ratinq Press the a button to highlight the Canadian French Rating selection. Press the q button and the Block Canadian French Rating panel will be displayed. In the Block Canadian French Rating panel you can customize the program blocking of the following ratings: - General audience 8 ans+-...
  • Page 57: Blocked Unrated Programming

    VlZIOVU37L HDTV10A UserManual 4o5.Z4 B{ocked Unrated Proqramminq Follow the procedure in the previous section 4.5.7 to display the Parental Control menu and then press button highlight Block Unrated TV selection. Press the _button to turn-on or turn-off blocking of programming that does not have a rating.
  • Page 58: Reset All Settings

    VlZlOVU37L HDTV10A UserManual 4,_$o_B Reset RLL Settinqs Press the a button to highlight the Reset All Settings selection. Press the I_ button to reset the TV to the default factory settings. Once the adjustments are completed press the LAST button repeatedly exit completely.
  • Page 59: 14Dmi Input Picture Adjustment

    VlZlOVU37L HDTV10A UserManual 4°8 HDMI Input Picture Ad]ustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input section 4.2. Once adjustments completed press the LAST button repeatedly exit the OSD completely. HDMI Input Audio...
  • Page 60: Video Input Picture Adjustment

    VlZIOVU37L HDTV10A UserManual Input A.q Video PictuFe Rd]ustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments.
  • Page 61 VlZlOVU37L HDTV10A UserManual Auto Phase(forComponent input) Press the a buttontohighlight theH/VPosition. Pressthe Q buttonand the new H/V Position submenu willbedisplayed. Press the a button to highlight AutoPhase. PresstheQ buttonto execute this option.The TV will automatically l ook for the phaseof the signal t ofinetunethepicture.
  • Page 62: Video Input Parental Control

    VlZIOVU37L HDTV10A UserManual 4°1_ Video Input Parental Contro[ The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.5.7. The menu difference is that there is no icon along the top for DTV / TV adjustments.
  • Page 63: Brightness

    VlZlOVU37L HDTVIOA UserManual TheBacklight leveldoesnotaffectthe Brightness ( blacklevel)or Contrast ( whitelevel)of the picture, i t adjusts thelampcurrent a ndthisaffects theoverall b rilliance ofthepicture. Once theadjustments arecompleted p resstheLASTbuttonrepeatedly t oexittheOSDcompletely. 4, 3°3 Bmiqhtness Press the a button to highlight theBrightness selection. Press the Q buttonto start a djusting t hebrightness a nd themenu page will d isappearand be replaced by a small Brightness Indicator B ar so you can see the brightness level between the minimum and...
  • Page 64: Color Temperature

    VlZlOVU37L HDTV10A UserManual 4,,13oS Coto Tempersture Press the a button to highlight the option for Color Temperature selection. The default is the 9300K (Cool) setting. Press the D or Q button if you want to choose the 9300, 6500 or Custom option. Once the adjustments are completed press the...
  • Page 65: Position

    VlZlOVU37L HDTV10A UserManual Vo Position Ao13o8 Press the a button to highlight the Vertical Shift selection. Press the _ button to start adjusting the vertical position of the picture. Use the D or _ button to adjust the vertical position. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
  • Page 66: Understanding Viewing Features

    VlZIOVU37L HDTV10A UserManual 4°16 Understandinq Viewing FeaboFes Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 35. Modes 4oiSol Viewimq Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image.
  • Page 67: Maintenance

    If the display still fails to perform as expected, contact the VlZlO for assistance by calling 1-877-MYVlZlO (698- 4946) or e-mail us at techsupport@vizio.com. No power. Make sure the power button is ON (White VlZIO Logo). Make sure AC power cord is securely connected to the AC socket.
  • Page 68 VlZlOVU37L HDTV10A UserManual Power is ON but no screen Make sure the video cable supplied with the TV is secured to the correct video image. output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc.
  • Page 69: Telephone & Technical Support

    Support Department at the number below. Customer support and quality service are integral parts of VlZlO's commitment to service excellence. For technical assistance contact our VlZlO Technical Support Department via email or phone. E-mail: techsupport@vizio.com Tel: 877-MYVlZIO (877-698-4946)
  • Page 70: Compliance

    VlZlOVU37L HDTV10A UserManual CompLiance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. Canada Germany BASE/BS Japan Electric Appliance Control Act SoS FGG @ Radio ImtePCeremoe Statememt GLass NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 71: Chapter 5 M_Sce

    VlZIOVU37L HDTVl0AUserManual Ohap em 6 MisoeLLameoos Jo omma ioo B01 Specifications Panel 37" Diagonal, 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.6 mm (H) x 0.6 mm (V) Display Compatibility HDTV (720P) Colors 16.7 Million 450 cd/m 2 (typical) Brightness Contrast 1100:1 (typical), 5500:1 with DCR...
  • Page 72: Glossary - Standard Definitions

    VlZlOVU37L HDTV10A UserManual GLossarv - Standard Definitions Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV "aspect ratio", that is, the screen's width as compared to its height. For example, a "32 inch TV screen"...
  • Page 73: 6°3 Index

    Saving, Flesh Tone, 41 MTS, 47 Partial Channel Search, Skip Channel, Time Zone, 47 Tuner Mode, 46 Cleaning your VIZIO TV, 67 Coax (RF) Connecting your DVD Player, Connecting for DTV, 15 Connecting your HDTV Set-Top Box, 17 Connecting your Basic Set Top Box, 19...
  • Page 74 VlZlOVU37L HDTV10A UserManual Audio Adjustment, Parental Control, Parental Control Picture Adjustment, Special Features, Block Unrated Programming, 57 Canadian English Rating, 55 TV Picture Adjust Advanced Video, Canadian French Rating, 56 Channel Block, 53 Backlight, 38, 62 Brightness, 39, 63 DTV Rating, 56 Color, 39 Movie Rating, 55 Color Temperature,...

Table of Contents