Vizio Universal Remote Control - Vizio VO47L FHDTV30A User Manual

VIZIO Universal Remote Control

The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote button functions are explained on the following pages.
This button starts all programming of the Remote Control.
Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
Repeated pressing of this button will switch between HDMI 1, HDMI
2, HDMI 3 and HDMI 4 inputs.
Repeated pressing of this button will switch between Component 1
and Component 2 inputs
Repeated pressing of this button will switch between AV1 and AV2
inputs.
Press this button to select TV programming.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode. When selecting a digital
channel directly use this button for the separation of main and sub-
channels. For example, channel 28-2 would be selected by the button
sequence 2 8 DASH 2.
NOTE: This is a programmable remote supporting up to 4 devices (see TV,
RCVR, CABLE, DVD buttons at the bottom of the remote). If the remote is
not working with your VIZIO TV, press the TV button on the remote to set
the functions back to TV.
Version 11/20/2008
VIZIO
12
www.VIZIO.com
®
VO47L FHDTV30A User Manual