Vizio Remote Control - Vizio VX32LOM User Manual

1.5 VIZIO Remote Control

GUIDE – This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the Audio Video input. Pressing this button
repeatedly will get you through the AV (AV1, AV2) inputs. Keep in mind that if
S-Video cable is being used, then AV2 will show the signal going through this
input as the S-video takes priority.
COMPONENT – Press this button to select the Component (YPbPr) input.
Pressing this button repeatedly will take you through the Component
(Component 1 and component 2) inputs.
HDMI – Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1 and HDMI2) inputs.
MENU – Use this button for the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -) – These buttons turn the volume up or down.
CH (+ or -) – These buttons change the channels
up or down.
NUMBER BUTTON PAD – Use these buttons to
select a channel or enter a password.
INPUT – This button allows the user to cycle
through the inputs. Repeatedly pressing of this
button will step you through the input sources in
the following sequence: TV, AV1, AV2 (S-Video),
Component1, Component2, RGB, HDMI1 and
HDMI2. Once you have stepped through the
entire sequence, you will return to the beginning.
- (DASH) – When selecting a digital channel
directly, use this button for the separation of main
and sub-channels. For example, channel 28-2
would be selected by the button sequence 2 8 --2.
Version 5/20/2008
VIZIO VX32L HDTV20A User Manual
12
www.VIZIO.com