Table of Contents
Advertisement
VlZlOVU37L HDTV10A UserManual
4os.5
Tint
Press the _
button to highlight the Tint selection.
Press the _
button to start adjusting the tint and the menu page will disappear and be replaced by a
small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.
Use the D or _ button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for
a realistic appearance.
In most cases, the default middle position is correct.
If people's faces look too
orange try reducing the level of color first as the case of this is often too much color.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4°2,,7
ShBcpness
Press the _I
button tohighlight theSharpness selection.
Press the_
buttontostart adjusting t hesharpnessand themenu page will d isappear and be replaced
by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and
maximum available levels. Use theD or II button toadjust thelevel.
The Sharpness adjusts the sharpness of the picture.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4°2,,@ Rdvanced
Video
Feabu es
Press the_
buttontohighlight theoptionfor Advanced Video selection and presseither the_ button to
select it. A new menu will be displayed showing the advanced functions available for fine tuning of the
picture.
Noise Reduction
(SNR)
Press the _button
to highlight
Smart Noise
Reduction (SNR).
Use this feature to diminish
picture
artifacts
caused
by the
digitizing
of
image motion content that may be present in the
picture.
Press the D or _
button to choose
from the Off, Low, Medium or Strong setting.
Once the adjustments
are completed
press the
LAST
button
repeatedly
to
exit
the
OSD
completely.
Version 3/12/2008
40
www.VIZIO.com
Advertisement
Table of Contents
