Table of Contents
Advertisement
VlZlOVU37L HDTV10A UserManual
Chapter
3 Se inq
Up
to
Watch
TeLevision
For 'Preparing Your LCD HDTV for Wall Mounting', see page 6.
3°£
Basic
LCD
HDTV
Start
Up
1.
Connecting
the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2.
Connect
Audio and Video Cables to the HDTV
(see pages 14 ~ 28 for detailed steps)
3.
Turning
Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON (Orange) button on the remote control.
4.
Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please
press the I_ button on the remote
control.
The Language choice screen will be
displayed; the default English option is
highlighted.
If you wish to change the
OSD langua_ae to Espafiol or Frangais,
press the 4_ button on the remote
control to select the language you want.
Press the _
button on the remote to
go to the next screen.
Note:
At this point, if a Set-Top Box from your
Local Cable or Satellite Service Company or
other equipment is been used; please press the
LAST key on the remote control and skip to
Step 5 on page 31. If this is not your case,
please continue at Step b.
a.
The Tuner screen will be
displayed; default choice is
Antenna.
If you are using Cable
(No Box) Service, press the
button on the remote control to
highlight CABLE.
Press the
_
button on the remote to go to the next screen.
Version 3/12/2008
29
www.VlZlO.com
Advertisement
Table of Contents
