Vizio Remote Control - Vizio VW32L HDTV20A User Manual

VIZIO VW32L HDTV20A User Manual

1.4 VIZIO Remote Control

GUIDE – This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMPONENT – Press this button to select the Component (YPbPr) input.
Pressing this button repeatedly will take you through the Component
(Component 1 and component 2) inputs.
HDMI – Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, and HDMI 2) different
inputs
MENU – Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
- These buttons navigate the On-Screen Display (OSD).
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL / – This button turn the volume up or down.
– This button change the channels up or down.
CH /
Number Button Pad – Use these buttons to
select a channel or enter a password.
INPUT – This button allows the user to cycle
through the inputs. Repeatedly pressing of this
button will step you through the input sources in
the following sequence: TV, AV (S-Video),
Component1, Component2, RGB, HDMI1 and
HDMI2. Once you have stepped through the
entire sequence, you will return to the beginning.
- (DASH) – When selecting a digital channel
directly, use this button for the separation of
main and sub-channels. For example, channel
28-2 would be selected by the button sequence
2 8 --2.
Version 9/17/2007
11
www.VIZIO.com