Erasing The Department Id And Password - Canon imageCLASS 2200 Reference Manual

Erasing the Department ID and Password

The following instructions describe how to erase the Department ID and Password you have
stored.
NOTE
•
When using Department ID Management with Card Reader-C1, you cannot erase the
Department ID.
1
Call up the desired screen as follows:
(Additional Functions)
When the System Manager ID/Password is set, enter the System Manager ID and System
Password after pressing "System Settings." Then, press
2
Press "On," and press "Store Dept. ID/Password."
3
Use " " and " " to display the Department and its settings that you
want to erase select the Department
→
Setting the Department ID Management
(ID).
press "Erase."
→
4
4-13