Control Panel Parts And Functions - Canon imageCLASS 2200 Reference Manual

Control Panel Parts and Functions

1
1 COPY key
Press to use the Copy function. The Copy Basic
Features screen appears in the touch panel
display.
2 FAX key
Press to use the Fax function. The Fax Basic
Features screen appears in the touch panel
display.
3 MAIL BOX key
Press to use the Mail Box function. The Box
Selection screen appears in the touch panel
display.
4 SCAN key
Press when the network scan function is
enabled.
5 Display contrast dial
Use to adjust the brightness of the touch panel
display.
6 Counter Check key
The value of the counter is displayed in the touch
panel.
7 Control panel power switch (sub power
supply)
Press to turn the control panel ON or OFF. When
set to OFF, the machine is in the Sleep mode.
1-20 Parts and Their Functions
4
3
2
1
COPY FAX MAIL BOX SCAN
I H G
5 6
Display Contrast Counter Check
Clear
Reset
ABC DEF
Guide
GHI JKL MNO
Start
Additional Functions
PRS TUV WXY
Interrupt
OPER
Error
Processing/Data
F E C
D B
8 Clear key
Press to clear incorrectly entered values or
characters.
9 Stop key
Press to temporarily stop a scanning operation,
an output operation of the copy function, or a
sending a fax operation.
0 Start key
Press to start an operation.
A Main Power indicator
Lights when the main power is turned on.
B ID key
Press when setting the Department ID
Management function.
C Error indicator
Flashes or lights if there is trouble in the
machine. When the indicator flashes, follow the
instructions appearing on the touch panel
display. When it lights, contact your service
representative.
D Processing/Data indicator
Flashes when this machine is performing
operations, and lights when there is fax data
received job in memory.
7
ON / OFF
8
Stop
9
0
Power
A