Erasing Shadows/Frame Lines (Frame Erase) - Canon imageRUNNER 2545i Copying Manual

Erasing Shadows/Frame Lines (Frame Erase)

The Frame Erase modes erase shadows and lines that appear when copying
various types of originals. This section describes the three Frame Erase modes
available.
IMPORTANT
• Only one of the three Frame Erase modes can be set at a time. If you select one of
3
these modes, the previously set mode is canceled.
• You can set the Frame Erase modes only for the original sizes shown on the touch
panel display.
NOTE
You can select the following original sizes: A4, A4R, A3, A5, or A5R.
■ Original Frame Erase
The Original Frame Erase mode erases the dark borders and frame lines that
appear around the copy if the original is smaller than the selected paper size.
You can also use this mode to create a blank border around the edge of the copy.
Original
IMPORTANT
The Original Frame Erase mode cannot be used with the Image Combination, ID Card
Copy, or Different Size Originals modes.
3-12

Erasing Shadows/Frame Lines (Frame Erase)

Not Set
Set
Copy
Copy