Canon imageCLASS 2200 Reference Manual page 85

6
Press "Done."
When you press "Stack Bypass Setting," you can set the paper size again.
7
Place your originals, and program the copy settings.
When printing documents stored in a mail box, this procedure is not necessary.
NOTE
•
When there is no reserved job, continue the procedure from step 2.
8
Press (Start).
When printing documents stored in a mail box, press "Start Print."
Copying starts.
NOTE
•
If heavyweight paper or envelopes are not fed normally from the stack bypass when
printing, curl up the edge of the paper by about 1/8" (3 mm) before loading it.
•
To cancel all settings and return the machine to the standard mode, press
Paper size selected
Paper size loaded presently
Making Prints Using the Stack Bypass
1
(Reset).
1-53