Canon imageCLASS 2200 Reference Manual page 76

IMPORTANT
•
Originals of 11-lb bond (40g/m
humidity environment.
•
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
1
- Carbon-backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
•
If the feeder rollers are soiled from scanning an original written with pencil, perform the Feeder
Cleaning procedure. (See 'Cleaning the Feeder
5-20.)
1
2
1-44 Placing Originals
2
) or less may become creased, if used in a high temperature or high
Adjust the slide guides to fit the size of the originals.
Neatly place your originals face up in the original supply tray.
When enlarging LTR or STMT-size originals to 11" x 17" or LGL-size paper, place your
originals horizontally.
Place the original as far as it will go, until the original set indicator is lit.
1
,' on p. 5-17, and 'Cleaning the Feeder
2
,' on p.