Checking a Sample Set before Copying
Before making multiple copies, you can check the copy result by using the Sample
Set mode.
IMPORTANT
•
[Sample Set] is displayed only when you set to make multiple copies in the Collate, Offset
Collate, Rotate Collating, Staple, Cover/Sheet Insertion, or Booklet modes. [Sample Set]
is not displayed when you set the Group mode.
•
If you select [Sample Set], you cannot use the Remote or Cascade Copy mode.
NOTE
The machine's counter counts the sample print as a print.
1
Place your originals © select the desired copy modes.
2
Press [Sample Set] ©
Printing starts, and one copy set is made.
(Start).
Checking a Sample Set before Copying (Sample Set)
(Sample Set)
1-93
1