Using The Numeric Keys - Canon imageCLASS 2220 Copying Manual

3
4
2

Using the Numeric Keys

1
2
2-24 Making Copies with the Original Image Shifted (Shift)
Press [OK] © [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
Press (Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] © [Shift] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
Place your originals © press [Special Features] © [Shift].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
Press [No. Key Entry] © select the shift direction © enter the
value using the numeric keys displayed on the touch panel
display © press [Done].
If you enter a value outside the setting range, a message prompting you to enter
an appropriate value appears on the screen.
NOTE
•
To change an entered value, select the direction, and enter the correct value.
•
If you make a mistake when entering a value, press
display © enter the correct value.
•
If you want to enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
and (Clear) to clear your entries.
C
•
For details on how to enter the values in inches, see Chapter 1, "Before You Start
Using This Machine," in the Reference Guide.
(Clear) on the touch panel
C
- (numeric keys)
9
0