Binding Erase
1
Place your original on the platen glass © press [Special
Features] © [Frame Erase].
IMPORTANT
Do not place originals with binding holes in the feeder, as this may damage the
originals.
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
2
Press [Binding Erase] © select the border where the binding
holes are located.
The border is where the binding holes are located on the original, if you visualize
the original as being face up.
Erasing Shadows and Frame Lines from Copies (Frame Erase)
2
2-37