Interrupt Mode
The Interrupt mode enables you to interrupt a reserved or current job long enough
to make higher priority copies. This mode is useful if you need to make a rush copy
during a long copy job.
IMPORTANT
If you select the Interrupt mode, you cannot use the Remote or Cascade Copy mode.
NOTE
You can make interrupt copies whenever the machine is ready to scan.
1
Press [Interrupt].
If you want to make copies after changing the Department ID while Department
ID Management is enabled, press
password. (See Chapter 1, "Before You Start Using This Machine," in the
Reference Guide.)
NOTE
When you press [Interrupt], the job being processed is not interrupted until the
interrupt copy job starts printing.
(ID) © enter the Department ID and
ID
Interrupt Mode
1
1-91