Connecting The Serial Interface - Epson Action Laser Action Laser User Manual

4. Plug the other end of the cable into your computer.
Now that you have connected the parallel interface, see Chapter 3
for information on operating your printer.

Connecting the serial interface

If you are using the printer's serial interface, make sure that you
have a properly shielded cable, and that it is the correct one for your
computer.
Follow these steps to connect the serial interface:
1. Turn off both the printer and the computer.
2. Plug the cable connector securely into the serial interface as
shown. (The serial interface is just to the left of the DIP switches
if you are facing the back of your printer.)
Connecting the Printer to Your Computer
Testing and Connecting Your Printer
2-13