Using SelecType
Interface submenu
To enter the interface submenu from the main menu, follow the
steps below:
Press
1.
the
display.
2.
Press the
SET
starts blinking, indicating that it
If
I/F function
3.
the
button to select
4.
Press the
SET
appears next to
I / F = S E R I A L *
5.
Press the
SET
where you can
below. (The SelecType Options section in this chapter describes
options for these functions in detail.)
BAUD RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
Use the
6.
change.
Note: This submenu does not work in a loop. Pressing the A
button when BAUD
button
when ROBUST-XON
submenu and return to the main menu.
3-16
Using the Printer
or
button until you see
button to activate the menu option. (The option
is set to the PARALLEL
the SERIAL
button to set the
SERIAL.
button a third time to enter the interface submenu,
options for
change
or
button to move to a function you want to
RATE
the
been activated.)
has
option.
option. An asterisk (*)
SERIAL
menu functions listed
the
is displayed or pressing
is displayed causes you to exit
I/F function in the
option, press the
the
the