Epson Action Laser Action Laser User Manual page 151

10. Place the developer unit in a plastic bag and seal the bag. Then
wrap the unit in its original packing materials.
11. Locate the cleaning pad, which is embedded in the orange-
colored fuser inside the printer. Carefully take hold of the green
felt handles on the cleaning pad and lift out the pad. (Be careful
not to let dirt from the pad drop into the printer.)
WARNING: If the printer has been in use recently, the
fuser and the cleaning pad may be very hot. Be careful to
touch only the green felt handles on the pad when you
remove it. Do not touch the fuser or the pad itself.
Maintenance and Transportation
Transporting
Your
Printer
6-35