Epson Action Laser Action Laser User Manual page 83

For best results, use paper made especially for laser printers. Paper
made for plain-paper copiers is also a good choice.
to use less expensive paper, test it thoroughly before
If you want
regular use. Paper should be of good quality, relatively smooth, and
readily available. Also, keep in mind that if the paper is textured or
too rough, your printed output
Do not use paper that is sensitive to silicon oil.
Special paper — You
as long as it meets the weight limits given above for standard office
paper. However, do not use coated paper.
Labels — Use only labels designed for laser printers or plain-paper
copiers in your printer. When printing labels, you should use the
faceup output tray; this keeps the labels from curling or coming off
their backing
sheet.
paper delivery choices.)
To prevent the adhesive from coming into contact with printer
parts, use only labels that completely cover the backing
there are no gaps.
You should also test
an ordinary sheet of paper on top of a
sticks at all, the labels should not be used.
Other materials — You can use overhead projector transparencies
and adhesive drafting film if they are made for use with plain-paper
copiers or laser printers. These materials should be ejected faceup
into the face-up paper tray.
may not
use colored or three-hole punched paper
can
(Face-up printing is described in the section on
label sheet for leaking adhesive by pressing
the
be as clear.
of labels. If
sheet
Paper Handling 4-3
Selecting
Paper
sheet so that
paper
the