Epson Action Laser Action Laser User Manual page 101

If you set the paper size
size selected in SelecType, the message
the
CONTINUE/RESET
line.
After clearing the error, you have two options:
1. Change the
change the paper size to match. Press
exiting SelecType to continue printing.
2. Alternatively, press the
the current paper. (The message
in the display.)
For certain nonstandard sizes of paper, you may need to use the
manual feed option described in Chapter 4.
Character clipping
If a character is partially outside the printable area, the HP LaserJet
does not print any portion of the character. The ActionLaser prints
that portion of
easier to tell when you have exceeded your margins.
with a
button to clear the error; the printer is set off
paper in the cassette; then enter SelecType and
ON LINE
character
the within
print command that differs from the
CHANGE appears. Press
PS
the ON LINE
button to continue printing on
SIZE
PAPER
the printable area, making it
HP Emulation
button after
appears
ERROR
Printer Modes 5-7