Casio Exilim EX-FH100 User Manual page 62

[MENU] ---_ Set Up Tab ---_ USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
i Select this setting when connecting to a computer (pages 143,
152). With this setting, the computer sees the camera as an
Mass _ external storage device. Use this setting for normal transfer of
images from the camera to a computer.
Select this setting when connecting to a printer that supports
_ ic_i_ :_ PictBridge (page133).
[MENU] --_ Set Up Tab --_ Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
Video system used in Japan, the U.S., and other countries
Video system used in Europe and other areas
Normal TV screen aspect ratio
Wide screen aspect ratio
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are
displayed on the TV screen. The camera's monitor screen will show on-screen
information only (without any movie image).
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
168
Other Settings (Set Up)