Casio Exilim EX-FH100 User Manual page 38

4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
USB port
_-_L_onnector
USB cable
- USB/AV port
Terminal
cover
_'ll"X Small c onnector
Making sure that the I_ mark on the camera is aligned
with the _ mark of the USB cable connector, connect
the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the
camera if you connect via a USB hub. Always connect
directly to the computer's USB port.
5. Turn on the camera.
6.
Windows 7 / Windows Vista users: Click "Start" and then "Computer".
Windows XP users: Click "Start" and then "My Computer".
Windows 2000 users: Doubleclick "My Computer".
144
Using the Camera with a Computer