Casio Exilim EX-FH100 User Manual page 28

•
Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to
your printer's USB port.
USB port
Terminal cover
USB cable
-- USB/AV port
Large connector
_¢_ _ ___,_ Small connector
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or
unplugging the cable. Check the user documentation that
comes with the printer for information about requirements
before plugging into or unplugging from the printer.
134 Printing