Casio Exilim EX-FH100 User Manual page 31

•
Configuring the Same DPOF Settings for All the Images
[i-_-I] (PLAY) ---* Snapshot Screen ---* [MENU] ---* PLAY Tab ---*
DPOF Printing --* All images
. Use [A] and [V] to specify the number of copies.
You can specify a value up to 99. Specify O0 if you do not want to print the image.
• Note that the specified number of copies will be printed for all of the images in
any CS group included with the images.
• If you want to date stamp the image, slide the zoom controller. This will cause
"On" to be displayed, meaning the image will be date stamped.
2.
Press [SET].
_NOTE
• You can specify the number of copies for a specific image (page 137) or for all of
the images in a CS group (page 138) by performing the above procedure while an
image in the group is displayed.
• To specify the number of copies for a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [V].
This will display the "CS Frame Edit" menu.
2.
Use [A] and [V] to select "DPOF Printing" and then press [SET].
3. Use [A] and [V] to select "Select images" and then press [SET].
4. Use [,] and [,] to scroll through images until one you want to print is
displayed.
137 Printing