Casio Exilim EX-FH100 User Manual page 13

• Selecting the HDMI Terminal Output Method (HDMI Output)
[MENU] ---* Set Up Tab ---* HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
iiii
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i format output*
480p format output
576p format output
1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output
method may be 576p when outputting to a digital TV in a PAL reception area that does
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed
automatically, change the setting to 576p.
• If an image does not appear when "Auto" is selected as the output method, try
changing this setting to something else.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the
camera's bundled AV cable.
- DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN
terminals.
- Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting "L"61Only" for the slideshow
"Images" setting (page 120).
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
119
Viewing Snapshots and Movies