Casio CFX-9850G User Manual page 14

Key
[INTERNAL] Pressing this key while in the Communications Mode enters
P.35 [XMIT-9800] Pressing [SHIFT][INTERNAL] sends data to the CFX-9800G.
[ON/OFF]
[HALT]
[RESTART]
[DataLOG]
[NEXT]
• Data-Log Mode: Each press of [CH-View] in this mode
sequentially switches the channel whose data is on the dis-
play. The channel indicator of the currently selected chan-
nel flashes on the screen.
the Internal Mode. Pressing it again returns to the Communi-
cations Mode
Pressing this key turns data analyzer unit power on and off.
• Pressing this key while a sampling operation is in progress
halts the operation.
• Pressing this key in the Data-Log Mode exits the Data-Log
Mode and returns to the DONE state in the Communica-
tions Mode.
• Pressing this key during manual setup in the Setup Mode
exits the setup procedure.
Pressing [SHIFT] [HALT] clears any data sampled up to that
point, returns to the READY state, and stands by for the next
sampling operation to be started.
Pressing this key enters the Data-Log Mode. Note, however,
that pressing this key in the Multimeter Mode sequentially
changes the unit of measurement for the currently displayed
channel.
The [DataLOG] key functions as a [NEXT] key in the Setup
and Data-Log Modes.
• Pressing [NEXT] while performing manual setup recalls the
next setting value for the item you are setting. [SHIFT]
[NEXT] returns to the previous value.
• Pressing [NEXT] in the Data-Log Mode recalls the next data
item. [SHIFT] [NEXT] recalls the previous data item.
Chapter 1: Getting Ready
Description
7