Adjusting The Belt Tension - Brother BES-963 Instruction Manual
Six head electronic embroidery machine
Hide thumbs
Also See for BES-963:
- Parts manual (147 pages) ,
- Instruction manual (16 pages) ,
- Maintenance manual (14 pages)
Table of Contents
Advertisement
Chapter 8 Adjustment
8. Adjusting the Belt Tension
The belt Tension is adjusted to the optimum tension at the time of shipment from the factory.
However, as the belt is used,it becomes run in and may loosen around the machine pulley
and motor pulley . Use the following procedure to check the belt tension.
w
q
8 mm of deflection in the belt
9.8 N of pressure
w
slot
e
Place a gauge against the belt q, loosen the nut w, and then turn the nut e to move the slot
to the appropriate position so that there is 8 mm of deflection in the belt q when 9.8 N of
pressure is applied.
The machine operating direction is counterclockwise when seen from the machine pulley
end.
BES-963BC • BES-1263BC
159
Advertisement
Table of Contents
