Epson 3865X Plus User Manual page 64

2. Press Enter
You see:
3. If you want to change the serial port setting, be sure
Serial is
change the parallel port setting, highlight P a r a l l e l
Enter.
and press
4. Use L or T to highlight the appropriate setting for the port
you selected and press
setting.
Note
If you add an option card with a parallel or serial port and
highlight a setting that causes a conflict between your
built-in ports and the port on the option card, you see
this message:
Conflict with option card
Highlight a setting that is appropriate for your system'
configuration and press Enter.
If you want to change the setting
to step 3.
5. When the serial and parallel port settings are correct,
highlight *** SAVE SETTINGS
Enter.
The cursor block returns to the main Setup menu
and you see your updated serial and parallel interface
settings.
to move the cursor block into the submenu.
highlighted and press
The cursor block moves into the submenu.
Enter.
Running the Setup Program
Enter.
If you want
The screen displays the new
for the other port, return
*** and press
to
2-29