Epson 3865X Plus User Manual page 52

5. To set or change the date, highlight
Y
Enter.
OU
-
("mm" stands for month, "dd" stands for days, and "yyyy"
stands for year.)
6. Enter the date in the exact format shown in the box. Use
two digits for the month and day, and four digits for the
year; the Setup program automatically inserts the hyphens.
For example, to set the date for August 29, 1990, you would
type the following:
08291990
You can use the backspace key to make corrections.
If you enter an invalid date-for example, a number greater
than 12 for the month or greater than the number of days in
that month-the computer beeps and ignores your entry.
Try again.
When the date is correct, press
7. Check the new time and date to be sure they are correct.
Then press T once or twice to return to the main Setup
menu.
Note
The Setup program automatically saves the time and date
when you press Enter after typing each one. If you change
the time or date and then exit the Setup program without
saving your changes, the new time and date still take effect.
see this prompt:
Running the Setup Program
Date and press
Enter.
2-17