Microsoft Mouse Driver 7.0 Patch Utility - Epson 3865X Plus User Manual

Microsoft Mouse Driver 7.0 Patch Utility

If you are using the Microsoft mouse driver, version 7.0, and the
cursor is not operating properly within an application program,
you may need to install the patch described below. For example,
the cursor may freeze or move incorrectly when you are using
the AutoCAD program.
This patch creates an additional mouse driver which you can
then load for any program that has trouble controlling the
cursor. The original mouse driver remains unchanged. The
MOUSE7PT.EXE patch file is in the UTILS directory on your
Utility 1 diskette.
Follow these steps to install the patch:
1. Insert your Utility 1 diskette in drive A. Then type the
following and press
A:\UTILS
2. Type the following and press
MOUSE7PT C:\MOUSE.COM NEWMOUSE.COM
(where
MOUSE.COM is stored, and NEWMOUSE.COM is the
name you give the new driver file).
This command creates a new mouse driver named
NEWMOUSE.COM that has been patched to eliminate the
cursor problem. You can, of course, give the new mouse driver a
name other than NEWMOUSE.COM; just be sure to make the
extension .COM.
Enter
: \ is the drive and directory in which
C
to log onto the UTILS directory:
Enter:
Using the VGA UtiIities
A-45